Deburring The Burrs

Deburring is a type of finishing method utilized in several industrial environments and manufacturing settings. It is often applied in metal processes such as transforming them into different sizes and shapes. For instance, metals have many uses, which require them to be molded, cast, welded, slit, trimmed or sheared. In most cases, each process result to protrusions or rough and rugged edges. They are often referred to as burrs, or any particles rising from the metal sheet or blank. When they are removed, the procedure is called deburring.

There are many ways to achieve deburring. One way is to apply abrasive substances or components. They can be rubbed against the metal surface to smooth out tiny notches, thin shavings and other protruding pieces. Some machined metals require sanding in addition to deburring. Sanding can be done by hand or machine (for higher level of deformities). Filing or grinding is another way of deburring. Such process is effective in removing fragments and nicks. Take note that deburring should be done for all section of the metal sheet. Burrs often appear on edges and also on seams.

Deburring is essentially important to the metal industry. It results to the functionality, quality, aesthetics and most of all safety of all products. A small protrusion can possible make moving parts to create an injury or accident. Also, it can cause undesirable delays in the manufacturing process. This can cost companies a lot of money.

In woodworking, deburring is used to remove or smooth wood burrs. These include pieces of wood that are ripped, cut or shorn. The most common ways of deburring wood are filing and sanding. Sanding can be done with the use of hand or a power sanding machine. Edges, on the other hand, are finished with a router.

Deburring is a cost effective method, which enhance the quality as well as the functionality of wood and metal products.